© 2021 ICS®, Oregon Tool Inc. REV12232021 P/N 610794
536-E OPERATOR MANUAL
29
CUTTING WITH THE POWER CUTTER
Assure cut piece is controlled and does not fall unexpectedly.
NOTE: Concrete is very heavy;
30 cm x 30 cm x 30 cm = 68 kg (12 in x 12 in x 12 in = 150 lbs).
Slippery or unstable surfaces such as ladders may cause a loss of balance or
control of the power cutter.
secure and level surface.
Unexpected loss of control of the power cutter and loss of balance can result in
Do not overreach and do not cut above shoulder height.
pushback could result.
during cutting operations. Support the workpiece such that the cut remains open
Do not operate power cutter upside down.
Cutting debris can be directed back towards the operator.
WARNING
CAUTION
Operation
To Next Page
Loading...