ICS 680ES - Page 33

680ES OPERATOR MANUAL
33
© 2015 ICS®, Blount International Inc. Specications are subject to
change without notice. REV071315 F/N 577451
Operation
CONCRETE/MASONRY CUTTING
Recommended Concrete Cutting Techniques
2. Cut down to open slot
5. Reengage WallWalker® and repeat Steps
3 and 4
3. Insert WallWalker® rotate rear handle up
4. Pull saw out, rotate rear handle down,
press bottom of saw to leading edge of cut
and rotate rear handle up
1. Plunge in