2
© 2014 ICS, Blount International Inc. Specications are subject to change
without notice. REV061914 F/N 545067
QUICK START GUIDE 3
SYMBOLS & LABELS 10
SAFETY 15
TECHNICAL SPECIFICATIONS 16
SETUP 17
OPERATION 22
MAINTENANCE 31
TROUBLESHOOTING 41
REFERENCE 42
EMISSION CONTROL WARRANTY STATEMENT 43
DECLARATION OF CONFORMITY 45
SERVICE CENTERS 46
This manual outlines the maintenance and operation of ICS
®
manufactured
products.
This is a professional tool and is soley intended for use by trained and experienced
operators.
The 695GC / 695F4 chainsaw is designed to cut concrete, stone, and masonry when
used with the appropriate genuine ICS Diamond Chain. Ductile iron pipe may be cut
ONLY if using PowerGrit
®
Utility Saw Chain.
To get the maximum benefit from your saw, and ensure maximum safety, be sure to
read this manual thoroughly, and periodically review safety instructions.
INTRODUCTION/TABLE OF CONTENTS
To Next Page
Loading...
