ICS 695GC - Fueling Procedures and Safety

4
© 2014 ICS, Blount International Inc. Specications are subject to change
without notice. REV061914 F/N 545067
QUICK START GUIDE
FUELING THE SAW
WARNING
CAUTION
Alwaysprovideadequateventilationwhenhandlingfuel.
Usecautionwhenhandlinggasoline.
FailuretouseICS®oil,orotherhighquality2-strokeoil,may
resultinprematureenginefailureand/orupto90%reduction
inenginelife.
FUELMIXTURE:50:1(2%)gasoline/oilmixture
• Usepremiumunleadedgasolinewithaminimumoctane
ratingof90.
• Addasmallamountoffuelpriortoaddingoilto
container,topoffwithfuelforproperfuel/oilmixture,
andshakethecontainer.
• Alwaysshutoffthesawbeforefueling.Allowenginetocooloffbeforefueling.
• Thoroughlymixthefuelinitscontainerbeforefueling.
• Slowlyopenthefuelcaptoreleaseanypressurethatmayhavebuilt-upinthetank.
• Alwaysfuelwithsawlayingonitsside.
• Afteraddingfuel,tightenthefuelcapcarefullyandsecurewithawrench.
50:1(2%)
 1gallon:2.6oz.
 5liters:100ml
:
FUELCAP