Need help?Do you have a question about the ICT EliteSuite and is the answer not in the manual?
Describes keypad indicator lights for system status and operation.
Explains the LCD display's functionality and message presentation.
Details the various tones generated by the keypad for user feedback.
Covers accessing and clearing stored alarm events for review.
Explains how to view and interpret system trouble conditions and faults.
Defines the master code's privileges and its importance for system management.
Describes the silent alarm feature using a duress code for security.
Guides on navigating to the user setup menu for modifications.
Details the process of setting and managing four-digit user codes.
Explains how to configure user-specific operational settings like arming privileges.
Covers programming and managing user proximity card details for access control.
Describes the time allowed to leave the protected area after arming.
Details how to disarm the system and deactivate alarms using user codes.
Explains the standard procedure for arming the system fully.
Covers arming the system while remaining within the premises, bypassing certain zones.
Explains how to arm the system even with some zones remaining open.
Describes temporarily deactivating specific zones for arming.
Details arming the system with a single button press for convenience.
Explains enabling chime alerts for specific zone openings, like doors.
Covers muting keypad sounds and audible alerts for silent operation.
Explains how to view and manage system messages from property management.
Details emergency panic alarm functions for immediate alerts.
Describes fire alarm behavior, activation, and reset procedures.
Lists and explains the system's configured zones and their properties.
Details the specific configuration settings for fire zones within the system.
Lists the one-key arming methods that are enabled on the system.
Details the panic key combinations that are enabled for immediate alerts.
Specifies programmed entry/exit delays and siren/beeper activation times.
Provides a table for recording programmed user names and their roles.
To Next Page
General