EliteSuite™ User Manual
21
manually re-program the bypass entries every time you arm
the system if you are always bypassing the same zone(s).
1. Press the bypass key then enter your [USER
CODE].
2. Press and hold the bypass key for 2 seconds the
last settings will be loaded. You may change these
settings if required.
3. Press the enter key to store the bypass settings
and exit.
4. Press the clear key to exit without making
changes.
ONE KEY ARMING
One key arming can be used to arm the system in regular,
force, stay and instant arming modes. You can use this
feature to allow specific individuals like service personnel
(i.e. cleaners) to arm without giving them access to any
other alarm system operations.
One key arming MUST be enabled by your
property manager or installation company.
Refer to the system configuration table on
page 27.
To Next Page
Loading...
Need help?
General
