EliteSuite™ User Manual
2
OPERATION
The following section provides you with information on how
to use the EliteSuite™ keypad.
When the text [USER CODE] is shown this
indicates that you are required to enter your
user code. The default Master Code to gain
access to your system is . This
code MUST be changed, see section 0 on
page 7 on how to program user codes.
Many of the features and options must be
enabled by the installation company or
property manager. If the feature is not
programmed or an option is not enabled the
system will generate a rejection tone. Refer
to the system configuration tables in section
0 on page 26.
INDICATOR LIGHTS
The EliteSuite™ LCD keypad features three status indicator
lights showing the condition of the EliteSuite™ Security
System.
Power / Trouble Indicator
Ready Indicator
Armed / Alarm Indicator
Figure 1 - Indicator Lights
To Next Page
Loading...
Need help?
General
