To Next Page

To Previous Page

EliteSuite™ User Manual

To fast force arm your system press and hold the force

key for two seconds. This option MUST be enabled by

your property manager or installation company. Refer to the

system configuration table on page 26.

BYPASSING ZONES

Bypassing zones allows you to program the alarm system to

ignore (deactivate) specified zones the next time the

system is armed. For example, you may wish to bypass

certain zones when workers are renovating part of your

establishment. Once the system is disarmed, the bypass

settings are erased.

Bypassing Zones

1. Press the bypass key then enter your [USER

CODE].

2. Use the up and down keys to scroll to the

zone(s) you want to bypass.

3. Press the bypass key to change the bypass status

of the selected zone.

4. Press the enter key to store the bypass settings

and exit.

5. Press the clear key to exit without making

changes.

To remove the bypass setting select the zone again and

press the bypass key, to remove all bypassed zones

press the force key.

Bypass Zone Recall

After disarming the system, the bypass entries are erased.

The Bypass Recall Feature reinstates the previous bypass

entries saved in memory. This eliminates the need to

ICT EliteSuite User Manual

Questions and Answers: