To Next PageTo Next Page
Need help?Do you have a question about the Ideal Boilers LOGIC MAX HEAT H 15 and is the answer not in the manual?
Details consultation with local gas suppliers and installation pipework standards.
Covers flue terminal positioning, spacing, and general installation guidance.
Stresses the need for a permanent live supply and compliance with wiring regulations.
Provides boiler dimensions and required clearances for operation and servicing.
Guidance on selecting flue kits, determining length, and flue terminal positioning.
Guidelines for condensate pipework installation, including internal and external connections.
Instructions for connecting water and gas supply pipes to the boiler.
Details electrical supply requirements, wiring regulations, and permanent live supply.
Outlines electrical and gas checks and procedures for boiler commissioning.
Step-by-step guide for the initial lighting and operation of the boiler.
Details the recommended frequency and procedures for servicing the boiler.
Provides a menu of fault codes and directs users to relevant sections for diagnosis.
Troubleshooting for flow temperature overheat or no water flow lockout.
Diagnostic steps for ignition lockout errors.
Troubleshooting guide for false flame lockout errors.
Troubleshooting steps for 'no water flow' detection.
General| Type | Heat Only |
|---|---|
| Output | 15 kW |
| Fuel Type | Natural Gas |
| Efficiency | 93% |
| Dimensions (HxWxD) | 700 x 395 x 278 mm |
| Warranty | 10 Years |
| Mounting | Wall Mounted |
| ERP Rating | A |
| CH Output (kW) | 15 kW |
| NOx Class | 5 |
| Max Working Pressure | 3 bar |
| Efficiency (%) | 93% |
