Ideal Heating i-mini C30 - User Manual

April 2019
UIN 222352
INSTALLATION
AND SERVICING
C24, C30
For users guide see reverse of book
When replacing any part on this appliance, use only spare parts that you can be
assured conform to the safety and performance specification that we require.
Do not use reconditioned or copy parts that have not been clearly authorised by Ideal.
For the very latest copy of literature for specification and maintenance practices visit our
website www.idealboilers.com where you can download the relevant information in PDF format.

Summary

General Information

1.3 Safe Handling

Essential safety precautions for moving and handling the boiler safely.

1.9 Flue Installation

Critical instructions for correct and safe flue system setup.

Installation Procedures

2.9 Determining the Flue Length and Flue Packs Required

Guide to selecting correct flue kits and lengths.

2.15 Condensate Drain

2.17 Electrical Connections

Safe and correct wiring practices for the boiler.

2.21 Commissioning and Testing

Essential checks for correct installation and operation.

Servicing and Maintenance

3.1 Servicing Schedule

3.8 Replacement of Components

3.19 PCB Replacement

Fault Finding and Troubleshooting

4.1 Fault Finding Chart Main Menu

Overview of error codes and fault resolution paths.

4.2 L1- Flow Temperature Overheat Lockout

4.3 L2 - Ignition Lockout

4.5 F1- Low Water Pressure

Ideal Heating i-mini C30 Specifications

General

Mounting	Wall-mounted
Output Rating	30 kW
DHW Output	30 kW
Efficiency (%)	94%
Flow Rate	12.2 l/min
ERP Rating	A
Boiler Type	Combi
CH Output	30 kW
Efficiency	A
Hot Water Flow Rate	12.2 l/min
Dimensions (HxWxD)	700 x 278 mm
Fuel Type	Natural Gas