To Next PageTo Next Page
Need help?Do you have a question about the Ideal Heating LOGIC MAX COMBI 2 C30 and is the answer not in the manual?
Crucial operational notes, including casing, storage, faults, and user restrictions.
Step-by-step instructions for initiating the boiler's operation sequence.
Explanation of the boiler's frost protection mechanism and recommendations.
Step-by-step guide on how to re-pressurise the central heating system.
Detailed steps to thaw a frozen condensate pipe.
Emergency procedure to follow if a gas leak is suspected.
Diagnostic steps for when no hot water is available.
Diagnostic steps for when central heating is not working.
Diagnostic steps for when both hot water and heating are unavailable.
Fault indicating overheating, with steps to resolve.
Fault indicating ignition failure, with troubleshooting steps.
Fault indicating the flame has been lost during operation.
Fault indicating insufficient water flow through the system.
Fault indicating flame is present before gas supply.
Fault indicating critically low system water pressure.
Fault indicating a problem with the gas valve.
Fault indicating a blockage in the flue or condensate pipe.
General| Boiler Type | Combi |
|---|---|
| Mounting | Wall-mounted |
| Output Rating | 30 kW |
| DHW Output | 30 kW |
| Dimensions (HxWxD) | 700 x 395 x 278 mm |
| Fuel Type | Natural Gas |
| Max Working Pressure | 3 bar |
| ERP Rating | A |
