To Next PageTo Next Page
Need help?Do you have a question about the Ideal Heating LOGIC COMBI2 C24 and is the answer not in the manual?
Ensures appliance installation and work comply with Gas Safety regulations by a qualified engineer.
Specifies the appliance must be earthed with a 230V supply and 3A fusing.
Covers casing, compartment storage, fault handling, sealed components, and child usage.
Identifies and explains the function of each control knob and display indicator.
Step-by-step instructions for initiating the boiler's heating and hot water functions.
Details operation for central heating and domestic hot water, prioritizing DHW.
Describes operation for domestic hot water only.
Instructions on how to turn off the boiler via the mode button.
Explains the preheat function for faster hot water delivery.
Guidance on adjusting central heating radiator temperatures up to 80°C.
How the boiler prevents freezing when ambient temperature drops below 5°C.
Steps to restart the boiler following a fault condition.
Step-by-step guide to topping up system water pressure to 1-1.5 bar.
Advice for users on identifying external issues before calling for service.
Instructions for safely defrosting a blocked condensate pipe.
Tips to prevent the condensate pipe from freezing during cold weather.
Guidance on cleaning the boiler and recommended servicing frequency.
Action to take if a gas leak is suspected, including emergency contact.
Diagnostic steps to resolve issues with no hot water supply.
Diagnostic steps to resolve issues with no central heating.
Steps for diagnosing when neither heating nor hot water is available.
Explanation of various operational statuses shown on the display.
Interpreting specific codes indicating lockout or faults.
Action for fault code F01 related to low system pressure.
Actions for fault codes F02 (Flame Loss) and L02 (Ignition Lockout).
Actions for fault codes F03 (Fan), F04 (Flow), F05 (Return) Thermistors.
Actions for fault codes F07 (Low Voltage) and F09 (Unconfigured PCB).
Actions for fault codes L01 (Overheat/No Flow) and LOd (Blocked Flue/Condensate).
Actions for fault codes dU (Diverter Valve) and FOC (DHW Thermistor).
General| Energy Efficiency Rating | A |
|---|---|
| ErP Rating | A |
| Max. working pressure | 3 bar |
| Type | Combi |
| Output (kW) | 24 kW |
| Central Heating Output (kW) | 24 kW |
| Domestic Hot Water Output (kW) | 24 kW |
| Height (mm) | 700 mm |
| DHW Flow Rate (litres/min) | 9.8 l/min |
| Fuel Type | Gas |
| Mounting | Wall Mounted |
| Fuel | Natural Gas |
