EasyManua.ls Logo

Ideal Heating LOGIC MAX COMBI 2 C24 - User Manual

Ideal Heating LOGIC MAX COMBI 2 C24
12 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
When replacing any part on this appliance, use only spare parts that you can be assured conform to the safety and performance
specification that we require. Do not use reconditioned or copy parts that have not been clearly authorised by Ideal Heating.
For the very latest copy of literature for specification and maintenance practices visit our website idealheating.com
where you can download the relevant information in PDF format.
USER GUIDE
LOGIC MAX COMBI
2
C24 C30 C35
October 2022
UIN 228290 A06

Other manuals for Ideal Heating LOGIC MAX COMBI 2 C24

Question and Answer IconNeed help?

Do you have a question about the Ideal Heating LOGIC MAX COMBI 2 C24 and is the answer not in the manual?

Summary

1.1 Introduction

Safety

Adherence to current Gas Safety (Installation & Use) Regulations.

Electricity Supply

Appliance must be earthed, supply voltage and fusing requirements.

Important Notes

Casing, compartment use, fault handling, sealed components, child use.

1.2 Boiler Operation

Operation Modes

Details for Winter and Summer conditions, and Boiler Off mode.

Starting the Boiler

Step-by-step guide to start the boiler.

Preheat - Domestic Hot Water

Explanation of preheat function for faster hot water delivery.

Control of Water Temperature

How to adjust domestic hot water temperature and its limits.

Central Heating

How to adjust central heating temperature and its maximum.

Efficient Heating System Operation

Tips for efficient boiler operation and gas consumption reduction.

Weather Compensation

How weather compensation controls room temperature.

Boiler Frost Protection

Explanation of frost protection operation and recommendations.

Boiler Restart and Mains Power Off

Procedures for restarting and safely powering off the boiler.

1.3 System Water Pressure

To Top up the System

Step-by-step guide to top up system water pressure.

1.4 Points for the Boiler User

Consumer Helpline and Restart Procedure

Contact details for assistance and boiler restart instructions.

1.5 Frozen Condensate Drain

To Unblock a Frozen Condensate Pipe

Instructions for defrosting a frozen condensate pipe.

Preventative Solutions

Tips to prevent condensate pipe freezing in cold weather.

1.6 General Information

Boiler Pump Operation

Information about the boiler pump's self-check function.

Clearances and Service Requirements

Required clearances and maintenance frequency advice.

Service Request Function

Notification for service due and how to clear it.

Escape of Gas Procedure

Critical steps to follow in case of a suspected gas leak.

Cleaning and Maintenance

Guidance on cleaning the boiler and general maintenance.

1.7 Troubleshooting

No Hot Water

Troubleshooting steps if no hot water is available.

No Central Heating

Troubleshooting steps if central heating is not working.

No Hot Water or Central Heating

Troubleshooting steps if both hot water and heating fail.

1.8 Display Functions - Normal Operation Mode

Normal Operation Screens

Explains various operational screens shown on the boiler display.

How to Adjust Boiler Temperatures

Guides on adjusting radiator and DHW temperatures via knobs.

1.9 Display Functions - Fault Messages

Overheat Lockout

Steps to resolve overheat lockout faults.

Ignition Lockout

Steps to resolve ignition lockout faults.

Outside Sensor Fault

Action for outside sensor fault.

Room Thermostat Fault

Action for room thermostat fault.

Return Thermistor Fault

Action for return thermistor fault.

Spare PCB Not Set

Action for spare PCB not set fault.

Flame Loss

Steps to resolve flame loss faults.

Fan Fault

Action for fan fault.

No Water Flow

Steps to resolve no water flow faults.

Too Many Restarts

Action for too many restarts fault.

PCB Fault

Action for PCB fault.

Pump Rotor Blocked

Action for pump rotor blocked fault.

Flame On Before Gas On

Action for flame on before gas on fault.

Low Mains Voltage

Action for low mains voltage fault.

Flow Thermistor Fault

Action for flow thermistor fault.

Low Water Pressure

Steps to resolve low water pressure faults.

Pump Dry Run

Action for pump dry run fault.

Pump Fault

Action for pump fault.

DHW Thermistor Fault

Action for DHW thermistor fault.

Gas Valve Fault

Action for gas valve fault.

Blocked Flue;Condensate

Troubleshooting steps for flue or condensate blockages.

Ideal Heating LOGIC MAX COMBI 2 C24 Specifications

General IconGeneral
TypeCombi Boiler
Output Rating24 kW
Fuel TypeGas
Height700 mm
Depth278mm
DHW Flow Rate9.8 l/min
ErP RatingA
Central Heating Max Power24 kW
Hot Water Max Power24 kW

Related product manuals