Ideal Heating VOGUE MAX SYSTEM 15IE

Need help?

Do you have a question about the Ideal Heating VOGUE MAX SYSTEM 15IE and is the answer not in the manual?

Summary

Section 1 - General

Location of Boiler

Specifies suitable installation locations and site considerations for the boiler.

Gas Supply

Details requirements and checks for a safe and adequate gas supply to the boiler.

Flue Installation

Provides guidance on correct flue positioning and installation to ensure safety.

Boiler Dimensions, Services & Clearances

Outlines physical dimensions and required clearances for installation and servicing.

System Requirements

Lists necessary system components and specifications for proper boiler operation.

Section 2 - Installation

Mounting the Boiler

Step-by-step instructions for securely attaching the boiler to the wall mounting plate.

Determining the Flue Length and Flue Packs Required

Guide for calculating and selecting appropriate flue components based on site conditions.

Installing the Flue

Detailed procedure for fitting the flue assembly through the wall and securing it.

Condensate Drain

Instructions for connecting and routing the condensate drain pipe correctly.

Connections & Filling

Covers making water and gas connections and the procedure for filling and venting the system.

Electrical Connections

Specifies wiring requirements, safety precautions, and connection methods for the boiler's electrical supply.

Commissioning and Testing

Outlines the essential checks and tests required before and after initial boiler operation.

Handing Over

Procedures for explaining boiler operation and system controls to the end-user.

Section 3 - Servicing

Servicing Schedule

Details recommended intervals and tasks for routine boiler maintenance.

Boiler Front Panel Removal; Replacement

Step-by-step guide for safely removing and refitting the boiler's front panel.

Fan and Venturi Assembly Removal and Cleaning

Instructions for accessing, cleaning, and servicing the fan and venturi components.

Replacement of Components

General guidelines and important checks to perform when replacing any boiler part.

Ignition Electrode Replacement

Procedure for replacing the ignition electrode, including gap setting.

Pressure Gauge Renewal

Steps for safely replacing the boiler's pressure gauge.

External System Filter Cleaning Guide

Instructions for cleaning the external system filter.

Section 4 - Fault Finding

Fault Finding Chart Main Menu

Provides an overview and index for troubleshooting common boiler issues.

Overheat Lockout

Steps to diagnose and resolve an overheat lockout fault condition.

Flame Loss

Troubleshooting steps for when the boiler ignites briefly but then extinguishes.

Low Water Pressure

Diagnostic procedure for faults related to low system water pressure.

Blank Display

Guide for troubleshooting when the boiler's display screen shows no information.

Section 5 - Spare Parts

Code Of Practice

Benchmark Commissioning & Warranty Validation Service Record

Gas Boiler System Commissioning Checklist & Warranty Validation Record

Service & Interim Boiler Work Record

Flowchart For CO Level and Combustion Ratio Check on Commissioning a Condensing Boiler