To Next PageTo Next Page
Need help?Do you have a question about the Ideal Heating EVOMAX 2 and is the answer not in the manual?
Describes the boiler's combustion manager, its functions, and its role in providing status information to the system manager.
Explains the System Manager's controlling functions, configuration options (Master/Slave), and user interface.
Details the VariCAN adapter's function in extending bus communication outside the boiler for cascades or extension modules.
Describes the Extension Module's purpose of adding heating, DHW storage, and Hot Water Systems to an installation.
Explains the iCCS communication protocol, device limits, and cascade capabilities on the VariCAN bus.
Provides definitions for key terms related to system components like Plant, Boiler, Heating Circuit, and DHW circuit.
Explains how to navigate the system menus using the buttons and rotary knob on the interface.
Details general system configuration options including language, date, time, and access levels.
Covers boiler status, configuration, service, settings, pump, flue, hours run, and fault management.
Details plant status, operating modes, settings, pumps, PIDs, and frost protection for system-wide operation.
Covers heating circuit status, operation, temperature control, settings, and protection features.
Covers DHW status, operation, temperature control, settings, pump, legionella, frost protection, and time clock features.
Details cascade status, operation, sequence control, and boiler modulation settings for multi-boiler systems.
Provides diagrams and information on electrical connections for system components like the VariCAN adapter and extension module.
Explains the System Manager interface, detailing the functions of the rotary knob, LCD display, and buttons.
Guides through configuring the cascade system, including initial setup, scanning devices, and pairing.
Details configuring shared resources for the plant, including hydraulic separation, flue systems, and pump assignments.
Explains the step-by-step process for configuring individual boilers within the cascade.
Guides through configuring heating circuits, including pump signals, temperature settings, and sensor inputs.
Details the configuration of Domestic Hot Water (DHW) circuits, including tank temperature, antilegionella, and pump settings.
Illustrates hydraulic circuit diagrams for master boiler configurations.
Shows hydraulic circuit diagrams for slave boiler configurations in a cascade.
Illustrates hydraulic circuit diagrams for various extension module setups.
Provides a list of abbreviations used in the manual with their corresponding descriptions.
General| Model | EVOMAX 2 |
|---|---|
| Efficiency | up to 97% |
| Weight | 180 kg |
| Warranty | 10 years |
| Mounting | Wall-mounted |
| ErP Rating | A |
| NOx Class | 5 |
| Fuel Type | Natural Gas |
| Boiler Type | Condensing |
