Ideal Heating EVOMAX 2 - Menu - Boiler - Service; Menu - Boiler - Settings

12
3.5.10 Menu – Boiler - Service
Theservicesubmenusgiveyoutheoption
toruntheboilerselectedatMin,Maxand
Variable capacity.
The service menu has the following three
options:
Service
Service min
Service max
Service variable
Service
Boiler 1
Boiler 2
All boilers
Oncetheboilerisselectedthentheservice
interval will start and the boiler will run in
servicemodeattheselectedcapacityfora
maximumof10minutes.Ifyouwishtoabort
servicemode,justusethebackkey.
The following screens will be displayed
duringservicemode:
Boiler 1 Service
Operation: Service min
Flow temp: 40.2ºC
Capacity: 30%
Boiler 1 Service
Operation: Service max
Flow temp: 40.2ºC
Capacity: 100%
When service variable is selected, an
additionalparameterneedsto beset.The
followingmenuwillbedisplayed:
Service variable
Set capacity
Start service var. capacity
Set capacity
Boiler 1
Boiler 2
All boilers
Thevariableservicemodecapacityforthe
selectedboilercannowbeset:
Boiler 1 Capacity
90%
Oncethishasbeenadjustedandconrmed
bytheselectkeythenthebackkeycanbe
usedtoreturntotheServicevariablemenu:
Service variable
Set capacity
Start service var. capacity
Oncetheboilerisselectedthentheservice
interval will start and the boiler will run in
servicemodeattheselectedcapacityfora
maximumof10minutes.Ifyouwishtoabort
servicemode,justusethebackkey.
Start service var. capacity
Boiler 1
Boiler 2
All boilers
The following screens will be displayed
duringservicemode:
Boiler 1 Service
Operation: Service variable
Flow temp: 40.2ºC
Capacity: 90%
Once the boiler has lit and ramped up to
capacity,thisislimitedtothesettingmade.
3.5.11 Menu – Boiler – Settings
Thesettingssubmenuallowsadjustmentof
boilerspecicvariables.
Settings
Boiler 1
Boiler 2
Boiler 1
Boiler pump
When the boiler pump is controlled by
the PWM/0-10V modulating control, the
parametersforthepumpmaybeset:
Boiler pump
Operating mode
Min. Boiler pump capacity
Max. Boiler pump capacity
Boiler pump
Operating mode
Min. Boiler pump capacity
Max. Boiler pump capacity
Standby pump capacity
Boiler pump
Min. Boiler pump capacity
Max. Boiler pump capacity
Standby pump capacity
Inertia delta temp.
Boiler pump
Max. Boiler pump capacity
Standby pump capacity
Inertia delta temp.
Diff. temp. ow/return
Boiler pump
Standby pump capacity
Inertia delta temp.
Diff. temp. ow/return
Overrun
Boiler pump
Inertia delta temp.
Diff. temp. ow/return
Overrun
Boiler pump
Diff. temp. ow/return
Overrun
Note:Dependingontheselectedoperating
mode additional parameters may be present
or omitted.