EasyManua.ls Logo

Ideal Heating EVOMAX 2 - Menu - DHW - Status - Real Time Values - Sensors; Menu - DHW - Status - Real Time Values - Outputs; Menu - DHW - Operating Mode; Menu - DHW - Tank Temperature

Ideal Heating EVOMAX 2
48 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
20
3.8.5 Menu DHW Status Real time
values – Sensors
Once sensors is selected the screen will
show the congured list of Domestic Hot
Watercircuits:
Sensors
DHW1 Boiler 1
Once a DHW circuit is selected, then the
following screen will display the current
Realtimevaluesfortheconguredsensors,
onceagainitemsthatarenotconguredwill
beshownwithnovaluebutwith2dashes
to indicate this, the list can be scrolled if
requiredtoshowallvalues:
DHW1 Boiler 1
Tank temperature: 45.6ºC
3.8.6 Menu DHW Status Real time
values – Outputs
Once outputs is selected the screen will
show the congured list of Domestic Hot
Watercircuits:
Outputs
DHW1 Boiler 1
Once a Domestic Hot Water circuit is
selected, then the following screen will
displaythecurrentRealtimevaluesforthe
conguredoutputs,onceagainitemsthatare
notconguredwillbeshownwithnovalue
butwith2dashestoindicatethis,thelistcan
bescrolledifrequiredtoshowallvalues:
DHW1 Boiler 1
DHW pump/valve: Off
3.8.7 Menu – DHW – Operating Mode
EachDomesticHotWatercircuitoperating
modecanbeset.Thiscontrolstheoperation
oftheselectedDomesticHotWatercircuit.
Operating mode
HC1 Boiler 1.1
HC2 Boiler 2.1
HC3 Boiler 2.2
Theoptionsare:
DHW Boiler 1
Standby
DHW Boiler 1
Time clock single day
DHW Boiler 1
Time clock multiple days
Standby–Frostprotectiononly
Timeclocksingleday–Normaloperation,timed
Timeclockmultipleday–Normaloperation,
timed.
3.8.8 Menu DHW Tank temperature
EachDomesticHotWatercircuittargettank
temperature can be set for different operating
modesfortheselectedDomesticHotWater
circuit.
Tank temperature
DHW1 Boiler 1
DHW1 Boiler 1
Tank temp day
Tank temp night
Tank temp holiday
Each selected tank temperature set point
canbeadjustedandthenset,theadjustment
screenisleftbypressingthebackbutton:
Tank temp day
65ºC
Tank temp night
10ºC
Tank temp holiday
10ºC
3.8.9 Menu – DHW – Settings
Each Domestic Hot Watercircuit has a
numberofsettingsthatcanbeadjustedfor
theselectedDHWcircuit.
Settings
HC1 Boiler 1.1
DHW1 Boiler 1
One time boost
Charge pump
Legionella
DHW1 Boiler 1
One time boost
Charge pump
Legionella
Frost protection
DHW1 Boiler 1
Charge pump
Legionella
Frost protection
Early start DHW storage
DHW1 Boiler 1
Legionella
Frost protection
Early start DHW storage
DHW1 Boiler 1
Frost protection
Early start DHW storage
3.8.10 Menu DHW Settings One
time boost
Each DHW circuit can have a one-time
boost to allow for out of hours hot water
requirements.The boost can be enabled
andatanktemperaturesetforthisfunction.
On/Off
One time boost
On/Off
One time boost
Temperature
60ºC

Table of Contents

Other manuals for Ideal Heating EVOMAX 2

Related product manuals