Ideal Heating EVOMAX 2 - Menu - Boiler - Status - Configuration - Outputs; Menu - Boiler - Status - Configuration - Parameters; Menu - Boiler - Status - Real Time Values

10
Temperature sensors
Outside: - -
Room1: - -
Other Sensors
When the menu option Other sensors is
selected the following screen will now be
displayed,itemsthatarenotconguredwill
beshownwithnovaluebutwith2dashes
to indicate this, the list can be scrolled to
showallvalues:
Other Sensors
WPS: Switch
WFS: - -
Other Sensors
WPS: Switch
WFS: - -
3.5.4 Menu – Boiler – Status –
Conguration - Outputs
Theoutputsmenuhasthefollowingoptions:
Inputs
Boiler 1
Boiler 2
Depending upon how many boilers are
conguredinthecascade,theywillappear
hereinasequentiallist.
Onceaboilerisselected,thenthefollowing
menuallowsyoutoselectwhichconguration
parametersyouwanttodisplay:
Boiler 1
PWM/0-10V (Boiler pump)
MFR1 (HC1 pump)
MFR2 (DHW pump)
Boiler 1
PWM/0-10V ()
MFR1 (HC1 pump)
MFR2 (DHW pump)
MFR3 (Boiler on indicator)
Boiler 1
MFR1 (HC1 pump)
MFR2 (DHW pump)
MFR3 (Boiler on indicator)
MFR4 (Boiler Fault indicator)
Boiler 1
MFR2 (DHW pump)
MFR3 (Boiler on indicator)
MFR4 (Boiler Fault indicator)
Boiler 1
MFR3 (Boiler on indicator)
MFR4 (Boiler Fault indicator)
3.5.5 Menu – Boiler – Status –
Conguration - Parameters
The parameters menu has the following
options:
Parameters
Boiler 1
Boiler 2
Depending upon how many boilers are
conguredinthecascade,theywillappear
hereinasequentiallist.
Onceaboilerisselected,thenthefollowing
menuallowsyoutoselectwhichconguration
parametersyouwanttodisplay:
Boiler 1
Soft start time
Flue type
Boiler 1
Soft start time
Flue type
Onceselectedtheparametersettingwillbe
displayed:
Soft start time
30.0sec
Flue type
Standard
3.5.6 Menu – Boiler – Status – Real
time values
TheRealtimevaluesmenuhasthefollowing
options:
Real time values
Inputs
Sensors
Outputs
Real time values
Inputs
Sensors
Outputs
Real time values
Sensors
Outputs