Ideal Heating EVOMAX 2 - Menu - Cascade Manager - Settings - Hours Run; Menu - Cascade Manager - Settings - Timed; Menu - Cascade Manager - Settings - Ext. Heat Source Sequence

23
3.9.11 Menu – Cascade manager -
Settings - Hours run
Thesequencechangeoverwill occur after
the number of burner hours hav been
completedbythecurrentleadboiler.Itcan
be set in multiples of 10 hours as shown
below.SelectDonetoconrmthechange.
Hours run
100hours
Done
3.9.12 Menu – Cascade manager –
Settings - Timed
Thesequencechangeoverwill occur after
theTimedperiodhasbeencompleted.Itcan
besetinmultiplesof1dayasshownbelow.
SelectDonetoconrmthechange.
Hours run
7day(s)
Done
3.9.13 Menu – Cascade manager –
Settings - Ext. heat source sequence
ThesequenceorderlocationfortheExternal
heatsourcecanbeset.Itcanbesettobe
alwaystherstinthesequenceorderorthe
lastinthesequenceorder.SelectDoneto
conrmthechange.
Ext. heat souce sequence
Always rst
Done
Ext. heat souce sequence
Always last
Done