- 23 -
•
Blade and cutting stick replacement
•
If the cutting quality decreases:
•
Check the cutting depth (see page 31).
•
Check the cutting stick (see page 24).
•
Replace or grind the blade
(see page 23 - 31).
The blade cannot be ground if the blade
height is less than 35 mm/1,38 inches. A
new blade must be used.
Purchase the new blade from Krug &
Priester, D -72336 Balingen only.
The blade may only be ground by a
qualified workshop or from the
manufacturer Krug & Priester,
D -72336 Balingen.
Danger! Risk of injury!
The blade is extremely sharp. Do not
extract or transport the blade without
protection. Changing the blade may only be
performed by trained staff.
To Next Page
Loading...
