- 33 -
A
B
F
Nr. 9003 233
Nr. 9001 828
•
Blade and cutting stick replacement
•
Grease the backgauge (A) control weekly.
(Use non-resinous grease).
Grease the remaining parts (B) twice a year
(see picture).
Danger! Disconnect the mains before
starting any service work or before
removing the cover.
Put the machine on its left side.
Danger! of tilting!
Remove cover (C) and lower panel (D) (tools
in tool set).
•
Remove remaining paper
•
Grease the machine
•
Check the two joining bolts and
pushing bar for wear. (F). If necessary
inform your service personnel.
•
Mount the machine.
= Greasing points on the machine.
To Next Page
Loading...
