CAUTION
Toprotectyourself,think“SafetyFirst”:
• Complywithlocalandnationalsafety
codes.
• Useappropriatepersonalprotective
equipment such as face shields,
insulating gloves, insulating boots,
and/or insulating mats.
• Beforeeachuse:
- Perform a continuity test by touching
the test leads together to verify the
functionality of the battery and test
leads.
- Usethe3PointSafetyMethod.(1)
Verify meter operation by measuring
aknownvoltage.(2)Applymeterto
circuitundertest.(3)Returntothe
known live voltage again to ensure
proper operation.
• Alwaysworkwithapartner.
Features:
• VibrationModew/indicatormovement
• AudibleandLEDIndicationofVoltage
- 3 - - 4 -
Symbols on the Unit
RiskofDanger.Important
Information.SeeManual.
Hazardous voltage.
Applicationaroundand
removalfromHazardousLive
conductors is permitted.
AC(AlternatingCurrent)
DC(DirectCurrent)
EarthGround
CAT II
MeasurementCategoryII
applies to test and measuring
circuits connected directly
to utilization points (socket
outletsandsimilarpoints)
ofthelow-voltageMAINS
installation
CAT III
MeasurementCategoryIII
applies to measuring circuits
connected to the distribution
part of the building’s low-
voltageMAINSinstallation
CAT IV
MeasurementCategoryIV
applies to test and measuring
circuits connected at the
source of the building’s low-
voltageMAINSinstallation
~
...