Need help?Do you have a question about the IDEAL SIGNALTEK and is the answer not in the manual?
General| Category | Test Equipment |
|---|---|
| Manufacturer | IDEAL Networks |
| Model | SIGNALTEK |
| Power Source | Rechargeable Battery |
| Battery Type | Lithium-ion |
| Operating Temperature | 0°C to 40°C |
| Testing Capabilities | Network cable testing, Ethernet testing, PoE testing |
| Storage Temperature | -20°C to 60°C |
| Humidity | 10% to 90% non-condensing |
Core tests: wire mapping, link speed, and BERT for cable quality.
Explains the purpose of buttons and indicator lights on the handsets.
Information on power sources, battery types, and charging.
Configures which tests are performed in different link conditions.
Defines test behavior for Remote, Link, and No-Link conditions.
Controls test duration and pass/fail thresholds for BERT tests.
Provides instructions for upgrading the device's software.
Steps to initiate automated cable testing procedures.
Details tests performed on live network connections.
Describes testing of unterminated cables for basic parameters.
Explains how to read wire map, link establishment, and BERT results.
Guides on troubleshooting errors found during performance tests.
Guidance on network diagnosis and IEEE standards.
To Next Page
