Need help?Do you have a question about the IDEAL SecuriTEST and is the answer not in the manual?
General| Type | Cable Tester |
|---|---|
| Display | LCD |
| Continuity Test | Yes |
| Length Measurement | Yes |
| Wiremap | Yes |
| Power Source | Battery |
| Continuity Buzzer | Yes |
Safety precautions for using the SecuriTEST CCTV tester, including voltage limits.
Operating temperature, humidity, and DC input voltage limits for the SecuriTEST.
General safety instructions for operating the SecuriTEST, including handling and usage.
Precautions for safely charging NiMH and alkaline batteries in the SecuriTEST.
Overview of the SecuriTEST's capabilities as a CCTV testing and troubleshooting device.
Description of the SecuriTEST's parts, keypad, and their respective functions.
Details on MultiMeter keys, test lead connections, and their operations.
Explanation of the BNC, communication, and kickstand ports on the SecuriTEST.
Description of UTP, AUX, DC power jacks, and the main power switch on the device.
General technical specifications for the SecuriTEST, including input voltage, battery, image, and UTP test.
Detailed specifications for DC/AC voltage, DC/AC current, and resistance measurements.
Specifications for AC current, resistance, continuity, and rated fuse for the SecuriTEST.
Instructions for powering the SecuriTEST on/off and understanding the initial OSD setup screen.
How to select and operate different modes like Video Tester, Digital MultiMeter, PTZ, and UTP.
How to connect and use the Video Test mode, including NTSC/PAL and brightness/contrast adjustments.
How to use the Pattern Generation mode to output color bars and test patterns.
Description of buttons for selecting resistance, voltage, and current measurement modes.
Explanation of the LCD display elements and indicators in Digital MultiMeter mode.
Procedures for measuring resistance and testing continuity using the SecuriTEST.
How to measure AC and DC voltage, including polarity and RMS value.
Procedures for measuring AC and DC current, including breaking the circuit and using terminals.
Critical warnings about test lead placement and potential damage during current measurements.
Guidance on connecting cameras and monitors for PTZ operation testing.
Overview of the PTZ control setup screen for address, protocol, and baud rate.
How to use PTZ controls for movement, zoom, focus, and set up functions like GPST, SPST, TOUR, SPD.
How to access the PTZ camera's internal menu for advanced functions.
Setting PTZ camera address, protocol, and baud rate for communication.
How to select the correct PTZ protocol and transmission speed for camera compatibility.
Instructions for connecting and testing UTP cables using the SecuriTEST.
Explanation of how to interpret the results of UTP cable tests for various conditions.
How to access and view system information such as product version and battery status.
How to access and change main settings like user name, sleep time, and buzzer.
To Next Page
