4
1. SAFETY INFORMATION
Do not use the unit in damp conditions or environments
where explosive gases may be present.
Do not handle the unit with wet hands.
Avoid dropping or causing mechanical shock to the unit.
Do not expose the ports to liquids and avoid exposure to
dust.
Use only specified replacement fuses.
Do not use damaged test leads with the DMM.
Do not measure resistance on powered circuits.
When using the DMM function, set the proper mode
before
connecting to the circuit under test.
When measuring resistance, make certain that the circuit
is de-energized before connecting the test leads to the
circuit.
To Next Page
Loading...
