3
WARNING
SecuriTEST Safety Precautions
When using the Digital MultiMeter function to measure
voltage or current, be sure that the input does not
exceed the capabilities of the tester. Overloading the
tester can cause damage or personal injury.
When measuring current of unknown values, always
begin with the 10A mode, then step down to the 400mA
input if necessary.
Environmental Limitations
Temperature: -10 to 50 degrees C
14 to 122 degrees F
Relative Humidity: 0-90%, non-condensing
DC input voltage: 12V +/-10%, 1A
To Next Page
Loading...
