IDEAL SecuriTEST User Manual

25
Measuring Resistance
The unit of measurement is
Ω. The meter sends low
current into the circuit to measure its resistance.
PART FUNCTION DESCRIPTION
DC DC Voltage test
AC AC Voltage test
OHM
Resistance test
(Measuring unit: Ω)
VOLT
Voltage test
(Measuring unit: V)
AMP
Current test
(Measuring unit: mA, A)
Continuity test
(Beeps below 80 Ω)
How to measure: Connect the
red lead to and the black
lead to
as shown in the
figure to the left. Measure in
the resistance mode by
pressing
on the keypad.

IDEAL SecuriTEST Specifications

General

Brand	IDEAL
Model	SecuriTEST
Category	Test Equipment
Language	English