SIGNALTEK Operation Manual 2-9
each cable can be found on the cable data sheet provided by the
cable manufacturer.
Owner Information
The Owner Information screen is where the personal data about
the SIGNALTEK owner/operator is entered. This data is stored for
each job and is saved/printed on the header of the SIGNALTEK
cable performance reports.
If this information is left blank, the accompanying header
information on the printed reports will also be blank.
Figure 2-11 Owner Information
Display Preferences
The Display Preferences screen allows the contrast level of the
color LCD to be adjusted. The LCD is sensitive to temperature
changes and the contrast level may need to be adjusted when
operating the tester in very warm or cold conditions. Use the left
and right arrow keys to adjust the contrast to an acceptable level
and press F2 to save the settings.
To Next Page
Loading...
Need help?
General
