IDEAL MINI C24 Installation And Servicing

Name: IDEAL MINI C24
Brand: IDEAL
Rating: 4 (1 reviews)

60 pages

To Next Page

mini

C24,C28,C32

When re placing any part of this appliance, use only spare parts that you can be assured

confo rm to safety and perfo rman ce specification that we requ ire . Do not use

reconditioned or copy parts that have not been clearly authorised by Ideal Boilers

installation and

Your Ideal installation and servicing guide

servicing

For users guide see reverse of book

For th e v e ry latest co py o f lite r a t u re for specific at ion pu r p o se s ple ase v isit our websit e

ww w.idealboilers.com whe r e you will be able to dow nload the re levan t informat ion in pdf format .

17962.1062.4 4307 64A4 GB

*1796210624*

S24,S28

For details of document amendments, refer to page 3

Mod e l

Serial No.

Other manuals for IDEAL MINI C24

User Guide4 pages

Questions and Answers:

J
jbrownJul 27, 2025
What to do if my IDEAL Boiler is not working for central heating or hot water?
- C
  cathyperkinsJul 27, 2025
  First, ensure the boiler has power—the green LED (A) should be lit and flashing every 4 seconds; if not, contact your installer. Next, check that the pressure gauge reads at least 1 bar; if it's lower, repressurize the system using the filling loop until it reaches 1 bar, then turn off the tap and press the reset button (D). If the pressure continues to drop or you are unable to repressurize the system, contact your installer. Finally, if the lockout signal lamp (E) is lit, press the boiler reset button (D); if the boiler still doesn't fire, contact your installer.
R
Randall DoughertyAug 10, 2025
How to fix IDEAL MINI C24 when fan and pump run continuously but there is no attempt at ignition?
- R
  rodriguezyeseniaAug 10, 2025
  First, check that the air pressure switch test caps on top of the boiler are correctly fitted. Then, confirm that the integral programmer is set to an ‘on’ period and the function switch is set to ‘auto’. If it still does not operate contact your installer. If you have an external programmer, make sure the central heating channel is set to ‘on’. If it still does not operate contact your installer. Also, check that the room thermostat is set to the required temperature by turning it fully up – If this does not respond contact your installer. Finally, check the radiator temperature control (C) is set at the winter setting for central heating.

IDEAL MINI C24 Specifications

General

Model	IDEAL MINI C24
Category	Boiler
Output	24 kW
Efficiency	90%
Dimensions (HxWxD)	700 x 395 x 278 mm
Fuel Type	Natural Gas
Mounting	Wall Mounted
ERP Heating Efficiency	A
ERP Water Heating Efficiency	A
CH Output (kW)	24 kW
DHW Output (kW)	24 kW
Flow Rate (l/min)	9.8 l/min
Warranty	2 Years
Type	Combination boiler