IDEAL C24 User Manual

When replacing any part on this appliance, use only spare parts that you can be
assured conform to the safety and performance specification that we require.
Do not use reconditioned or copy parts that have not been clearly authorised by Ideal.
For the very latest copy of literature for specification and maintenance practices visit our
website www.idealboilers.com where you can download the relevant information in PDF format.
May 2014
UIN 205367 A08
INDEPENDENT
C24 C30 C35
For Users Guide see reverse of book
For details of document amendments, refer to page 3
INSTALLATION
AND SERVICING

IDEAL C24 Specifications

General

Boiler Type	Combi
Mounting	Wall Mounted
Fuel Type	Natural Gas
CH Output (kW)	24
DHW Output (kW)	24
Efficiency	94%
Dimensions (HxWxD)	700 x 395 x 278 mm
ERP Efficiency	A Rated

Summary

Safe Handling Procedures

Safe Handling Guidelines

Provides essential safety guidelines for handling the boiler during installation and maintenance.

Gas Supply Requirements

Flue Installation Guidelines

Condensate Drain Installation

Boiler Dimensions, Services & Clearances

Clearances and Dimensions

Details minimum required clearances around the boiler for installation and servicing.

System Requirements

System Requirements for Central Heating and DHW

Specifies parameters for CH and DHW systems, including pressures and temperatures.

Determining Flue Length and Packs

Flue Specifications and Requirements

Details flue resistance, lengths, bends, and wall thickness considerations.

Connections & Filling

Connection Types and Filling Procedures

Covers CH/DHW water, gas connections, safety drain, and system filling steps.

Commissioning and Testing

Commissioning Aspects

Covers electrical, gas installation, and general checks as part of the commissioning process.

Initial Lighting

Initial Lighting Procedures and Display

Guides through central heating, DHW, and display status checks during initial startup.

Servicing Schedule

Servicing Overview and Checks

Details general checks, component inspections, and combustion performance testing during servicing.

Ignition Lockout Faults

Flame Loss Fault Diagnosis

Gas Boiler System Commissioning Checklist

Commissioning Checklist Sections

Details sections to be completed within the checklist, covering controls, systems, and installation.

Service Record