EasyManua.ls Logo

IDEAL MINI C32

IDEAL MINI C32
4 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
mini
When replacing any part of this appliance, use only s pare parts that you can be
assured conform to safety and performance specification that we require. Do not use
reconditioned or copy parts that have not been clearly authorised by Ideal Boilers
Your Ideal users g uide
For installation and servicing guide see
reverse of book
users guide
C24,C28,C32
S24,S28

Other manuals for IDEAL MINI C32

Questions and Answers:

IDEAL MINI C32 Specifications

General IconGeneral
MountingWall-mounted
Boiler typeCombi
DHW output32.0 kW
Output32kW
Operating Pressure3 bar
Dimensions (HxWxD)700x395x278mm

Summary

Minimum Clearances

Boiler Controls

To Light the Boiler

Step-by-step guide on how to start the boiler, including checking valves and setting the main switch.

Diagnostic Lights

Control of CH Temperature

Control of DHW Temperature

To Shut Down the Boiler

For Short Periods

Instructions for turning off the boiler for brief periods by setting the selector to 'O'.

For Long Periods

Steps to shut down the boiler for extended periods, including switching off electricity and gas.

Frost Protection

Escape of Gas

Cleaning

Maintenance

Faults

No Heating or Hot Water

Checks to perform when there is no heating or hot water, including pressure and reset button.

Hot Water but No Heating

Troubleshooting steps for when hot water is available but heating is not functioning.

Heating but No Hot Water

Diagnosing issues when heating works but there is no hot water, checking flow rates.

Troubleshooting - Typical Non Product Faults

Boiler Not Working for Central Heating or Hot Water

Checks for power, pressure, lockout signal, and gas supply when the boiler is not operating.

Boiler Goes Through Ignition Sequence but Will Not Fire

Diagnosing why the boiler starts ignition but fails to fire, including air pressure switch checks.

Fan & Pump Run Continuously but There is No Attempt at Ignition

Troubleshooting continuous fan/pump operation without ignition attempt, checking programmer settings.

Mini C Only: Operating for Hot Water but Will Not Operate for Central Heating

Specific checks for Mini C models when only hot water is available, not central heating.

Mini S Only: Operating for Hot Water but Will Not Operate for Central Heating

Specific checks for Mini S models when only hot water is available, not central heating.

Mini S Only: Operating for Central Heating but Will Not Operate for Hot Water

Specific checks for Mini S models when central heating works but hot water does not.

Related product manuals