IDEAL TightSight 61-415 - Measuring Continuity; Measuring Resistance

Measuring AC ( ) or DC ( ) Current (Amps)
Measuring AC ( ) or DC ( ) Voltage
Verifying Continuity ( )
• Verify the circuit is de-energized.
• The meter will sense the level of resistance and beep if the resistance is less
than 10 Ω to confirm that continuity is present.
• Red LED will illuminate and resistance value will be displayed.
Verify the circuit is de-energized to obtain accurate measurements.
Measuring Resistance (Ohms / Ω )
15
To exit Continuity and enter
the Resistance mode,
Press the SEL Button