IDEAL Touch Connect Installation Guide

9
Installation
F
U
S
E
Using a flat bladed
screwdriver remove the
back cover from the
Touch thermostat and
insert only 3 batteries.
Immediately insert the
fourth battery into
the thermostat.
Turn electrical power
back on to the boiler.
O
On
Auto
MON 10:20
ZONE 1
Hold the thermostat
approx 2 metres away
from boiler.
Locate the gateway adjacent to the
house wireless router and connect
the supplied ethernet cable from
the gateway to the wireless router
as shown.
Connect the Gateway power
cable and 3 pin plug together,
then connect the 3 pin plug to a
convenient mains socket. Note DO
NOT yet power up the gateway.
5 6
7
10
8 9
Ethernet cable white (supplied) Gateway power cable (supplied)
3 pin plug
(supplied)
Gateway (supplied)
Homeowner wireless router
(not supplied)
DO NOT CONNECT
POWER TO THE GATEWAY
AT THIS STAGE

IDEAL Touch Connect Specifications

General

Brand	IDEAL
Model	Touch Connect
Category	Thermostat
Language	English