IDEAL Touch Connect - Changing Central Heating Schedule; Initiating Schedule Modification

10
O
On
Auto
MON 10:20
ZONE 1
20.5
Set system date
DONE
BACK
01 01 18
20.5
CONNECTING TO
BOILER
20.5
Set system time
DONE
00 00
Wait for the screen shown on the
left to be displayed. (In the unlikely
event that this screen is not shown
within 20 seconds, electrically
isolate the boiler, remove one
battery and repeat from step 8.)
When successfully connected the
screen shown on the left will be
displayed. Set the 24hr clock, then
select “DONE”.
Set the date, then select “DONE”.
If the screen goes blank before
set up is complete, tap the screen
and select MENU to access Help &
Settings to set time and date.
When set up is complete the screen
will go blank.
11
12
13
14
Installation