IDEATEC DLC4000 - DLC4000;DLC8000 Configuration Mode 2 Lightbar Conditions; Conditions for directional lightbar configuration (DLC8000 only)

IDEATEC S.A. - Z.I. de Noville-les-Bois - rue Léopold Génicot 19A - 5380 Fernelmont, Belgium - Tel: +32(0)81 42 00 10 - Fax: +32(0)81 57 91 70 - E-mail: info@ideatec.be
User’s guide DLC4000/DLC8000 - Doc. V2.1 - Firmware V3.1
Page 28
Identification des éléments
Description des éléments
Description du produit
11.
&
B5
B6
B3
B7
B8
B2 B4
B1
0
1
3
3X3X
2
3X2X
1X
B5
B6
B3
B7
B8
B2 B4
B1
B5
B6
B3
B7
B8
B2 B4
B1
IN 2 -
B5
B6
B3
B7
B8
B2 B4
B1
B5
B6
B3
B7
B8
B2 B4
B1
IN 2 -
B5
B6
B3
B7
B8
B2 B4
B1
B5
B6
B3
B7
B8
B2 B4
B1
IN 2 -
B5
B6
B3
B7
B8
B2 B4
B1
B5
B6
B3
B7
B8
B2 B4
B1
IN 2 -
Operation & Configuration (continued)
11.6. DLC4000/DLC8000 Configuration - MODE 2 (continued)
11.6.3. Conditions for directional lightbar configuration (DLC8000 only)
The configuration is made by the key B5 and gives the possibility to configure conditions with negative input 2
(« handbrake ») for the keys B5, B6, B7 and B8 if they are configured in group 1 or group 2 mode.
Keys B5, B6, B7 and B8 are conditioned by negative input 2 (« handbrake ») if they are
configured in group 1 or group 2 mode and the negative input 2 combined with key B1
activated (« blue lights ») starts automatically the key B5 (« Warning mode »).
Keys B5, B6, B7 and B8 are conditioned by negative input 2 (« handbrake ») if they are
configured in group 1 or group 2 mode and the negative input 2 starts automatically the
key B5 (« Warning mode »).
Keys B5, B6, B7 and B8 are conditioned by negative input 2 (« handbrake ») if they are
configured in group 1 or group 2 mode.
No condition for the keys B5, B6, B7 and B8.
SELECTION FLASHES DESCRIPTION