IDEATEC DLC4000 - DLC4000;DLC8000 Configuration Mode 2 Lightbar Simulation; Simulation for the directional lightbar (DLC8000 only).

IDEATEC S.A. - Z.I. de Noville-les-Bois - rue Léopold Génicot 19A - 5380 Fernelmont, Belgium - Tel: +32(0)81 42 00 10 - Fax: +32(0)81 57 91 70 - E-mail: info@ideatec.be
User’s guide DLC4000/DLC8000 - Doc. V2.1 - Firmware V3.1
Page 29
Identification des éléments
Description des éléments
Description du produit
11.
&
B5
B6
B3
B7
B8
B2 B4
B1
0
1
1X
B5
B6
B3
B7
B8
B2 B4
B1
B5
B6
B3
B7
B8
B2 B4
B1
B5
B6
B3
B7
B8
B2 B4
B1
B5
B6
B3
B7
B8
B2 B4
B1
B5
B6
B3
B7
B8
B2 B4
B1
Operation & Configuration (continued)
11.6. DLC4000/DLC8000 Configuration - MODE 2 (continued)
Simulation for directional lightbar is available.
No directional lightbar simulation.
If B5 is ON
If B7 is ON
If B8 is ON
11.6.4. Simulation for the directional lightbar (DLC8000 only).
Configuration on the key B6.
The simulation for the directional lightbar is working only if the keys B5, B6, B7 and B8 are configured in group 1 or
group 2 mode.
If B6 is ON
SELECTION FLASHES DESCRIPTION