IDEATEC S.A. - Z.I. de Noville-les-Bois - rue Léopold Génicot 19A - 5380 Fernelmont, Belgium - Tel: +32(0)81 42 00 10 - Fax: +32(0)81 57 91 70 - E-mail: info@ideatec.be
User’s guide DLC4000/DLC8000 - Doc. V2.1 - Firmware V3.1
Page 6
&
5.2. Power module
ÜChoose a flat surface and use 4 appropriate fixation screws.
ÜAlways install the console or the power module in a ventilated
area, and never close to a heat source.
ÜTake into account the size of the different connectors that
will be added to the assembly.
The power module must be protected
against humidity.
Do not attempt to enlarge
the mounting holes.
The safety of future users of this product depends on your installation.
Therefore, it is critical that you read, understand, and follow all instructions contained in this
installation guide.
i Drilling template on page 8
5.
Console and module installation (continued)
To Next Page
Loading...
