iDect Solo Single - Change the Time Format; Change the Date Format

34
8.1.1
8.1.18.1.1
8.1.1 Change the
Change the Change the
Change the T
TT
Time
ime ime
ime F
FF
Format
ormatormat
ormat
The time can be displayed either as 12-hour or 24-hour. The default
setting is 24 HOURS
24 HOURS24 HOURS
24 HOURS.
1. From the home screen, press M .
2. Press
+/- to CLOCK&ALARM
CLOCK&ALARM CLOCK&ALARM
CLOCK&ALARM and then M to select.
3. Press
+/- to SET FORMAT
SET FORMAT SET FORMAT
SET FORMAT and then press M to select.
4. Press
M again to select TIME FORMAT
TIME FORMATTIME FORMAT
TIME FORMAT.
• The current setting is displayed.
5. Press +/- to select 12 HO
12 HO12 HO
12 HOURS
URSURS
URS or 24 HOURS
24 HOURS24 HOURS
24 HOURS and then
press
M to confirm.
•
A confirmation tone is played.
6. Press O to return to standby mode.
8.1.2
8.1.28.1.2
8.1.2 Change the
Change the Change the
Change the D
DD
Date
ate ate
ate F
FF
Format
ormatormat
ormat
The date can be displayed either as Month/Day or Day/Month. The
default setting is DD/MM
DD/MMDD/MM
DD/MM.
1. From the home screen, press M .
2. Press +/- to CLOCK&ALARM
CLOCK&ALARM CLOCK&ALARM
CLOCK&ALARM and then M to select.
3. Press
+/- to SET FORMAT
SET FORMAT SET FORMAT
SET FORMAT and then press M to select.
4. Press
+/- to DATE FORMAT
DATE FORMAT DATE FORMAT
DATE FORMAT and then press M to select.
•
The current setting is displayed.
5. Press +/- to select DD
DDDD
DD/
//
/MM
MMMM
MM or MM
MMMM
MM/
//
/DD
DDDD
DD and then press
M to confirm.
• A confirmation tone is played.
6. Press O to return to standby mode.
This manual downloaded from http://www.manualowl.com