40
10
1010
10 ADVANCED SETTINGS
ADVANCED SETTINGSADVANCED SETTINGS
ADVANCED SETTINGS
10.1
10.110.1
10.1 Handset
HandsetHandset
Handset
Registration
RegistrationRegistration
Registration
IMPORTANT:
IMPORTANT:IMPORTANT:
IMPORTANT: When you purchase your phone system, all handsets are
already registered to your base, so you do not need to register them.
Handset registration is only necessary when you buy extra handsets or if
a handset has become faulty.
You can register up to four handsets to one base station, with each
handset’s number (1 to 4) shown on its display.
Note:
Note:Note:
Note:
Each handset can only be registered to one base.
You need to enter the Master PIN before you can register or unregister
handsets. The default Master PIN is 0000
00000000
0000.
10.2
10.210.2
10.2 Register A
Register ARegister A
Register Additional
dditional dditional
dditional H
HH
Handsets
andsetsandsets
andsets
1. Press and hold the
key under the base unit for approximately 5
seconds.
•
The message indicator on the base will flash for up to 1 minute,
while it is in registration mode.
2. On the handset, press
M
.
3. Press
+/- to ADVANCED SET
ADVANCED SETADVANCED SET
ADVANCED SET and then press
M
to select.
4. Press +/- to REGISTRATION
REGISTRATIONREGISTRATION
REGISTRATION and then press
M
to select.
•
If no action is taken on the handset within 10 seconds, the
registration
procedure will be aborted. If this happens, repeat
from step 1.
5. Enter the Master PIN and then press
M
to confirm.
Note:
Note:Note:
Note: The default Master PIN is 0000
00000000
0000.
• WAIT
WAITWAIT
WAITING
INGING
ING
flashes on the screen.
•
A confirmation tone is played to
indicate successful registration,
and the handset will return to standby mode, with its handset
number displayed.
•
If no base is found with the entered PIN, error tones are played
to indicate failed registration and the handset returns to
standby mode. You will need to repeat from step 1 above.
This manual downloaded from http://www.manualowl.com
To Next Page
Loading...
