Idis DA-ES1104 - Part 3 - Configuration; RAID Option Swich Settings; SATA Port Multiplier

17
Part 3 - Conguration
The default mode is SATA Port Multiplier and the RAID can be changed using the RAID option
switches.
Changing the RAID mode will delete all data from the hard drives.
RAID Option Swich Settings
1. RAID TYPE 1 / 2. RAID TYPE 2
1. RAID TYPE 1 2. RAID TYPE 2 Mode
OFF (Down) OFF (Down) SATA Port Multiplier
OFF (Down) ON (Up) RAID 1+0
ON (Up) OFF (Down) RAID 0
ON (Up) ON (Up) RAID 5
3. DISPLAY
Option Switch Display
ON (Up) RAID Mode
OFF (Down) HDD Status
• RAID Mode
LED D1 LED D2 LED D3 LED D4 RAID Mode
Green OFF OFF Red SATA Port Multiplier
Green OFF Green Red RAID 1+0
Green Green OFF Red RAID 0
Green Green Green Red RAID 5