Idis DC-D3233RX-N - Tampering

Part 1 - Remote Setup
37
Tampering
Select Tampering to congure tampering detection
event settings. With tampering detection event enabled,
a sudden change in the video, such as due to movement
of the camera or covering up of the lens, will be
assumed as an event.
• Sensitivity: Dene the tampering detection
sensitivity. Higher values will result in more sensitive
detection.
• Activation time: Specify how long tampering has
to be detected for it to be considered as an event.
Tampering detections that do not last for the
specied duration of time will not be considered as
events.
• Use Ignoring Time: Dene the event ignoring time.
Tampering detections taking place during the dened
time range will not be assumed as events.
• Event Action: Select a tampering detection event
alert action.
- Alarm Out: Select if you wish to generate an alarm
out.
- Send Email: Select if you wish to send an email.
Select the Image Attachment option to attach a
.jpg image of the event detected to the email.
- Remote Callback: Select this option to send a
message to a remote system and then select which
system to send the message to.
• Not supported from the IDIS Web program.
• The camera must be registered to the remote
system in order to use the Remote Callback
feature.
- Audio Alarm: Select this option to generate an
audio alert and then choose an audio le (.wav).
- FTP Upload: Select this option if you wish to
upload images to the FTP server.
- Record: Select this option to record video.
Event Action settings must be congured correctly
in order to perform event actions.