Idis DR-6532P-A - Stream I

Part 2 - Conguration
53
View Options
● Type: Selects the camera view.
● Mode: Selects the screen layout in live mode.
• Dewarping feature is not supported when mode is
set to the original.
• When changing the view mode, the resolution will
be applied automatically.
Miscellaneous
● Image Stabilizer: Activate Image Stabilizer. The
Image Stabilizer reduces blurring caused by camera
shake that results from external conditions such as
the wind.
● Video Out: Select NTSC or PAL as the method of
camera analog video output.
● Heater Mode: Set whether to use the heater. If On,
the heater will operate if the camera’s temperature is
lower than the heater operating temperature. If O,
the heater will not operate regardless of temperature.
● Video Out Mirror: If the video output is CVBS, the
screen can be inverted.
Stream I
Congure the camera’s live and recording resolution,
codec, picture quality, transfer speed, and ips speed
settings.
● Camera Channels: It’s possible to congure a unique
video prole for each camera.
● Bitrate Status: Display the highest value of stream.
Click the Setup button to change the allocation for
each channel. For more information on bitrate, refer
to Camera View Buttons on page 17.
●
: Apply the video prole settings of the camera
selected under Camera Channel to a dierent camera.
● Live/Remote Video Prole: Check the current Live
video picture quality and edit remote video prole
settings.
● Record Video Prole: Set up 4 recording quality
proles.