How to fix unable to display Live video on Idis Network Hardware?
If you're unable to display live video on your Idis Network Hardware, check the following: * Camera's video cable. * Monitor's video cable. * Camera's power setting. * Camera lens setting.
Why Idis DR-6316PS-S Network Hardware main unit won't turn on?
If the main unit of your Idis Network Hardware won't turn on, make sure to check the power cable connection and the power outlet.
What to do if Idis DR-6316PS-S NVR keeps on rebooting during a system upgrade?
If your Idis Network Hardware NVR keeps rebooting during a system upgrade, check the upgrade file's version. You can also try pressing the factory reset button without completing the upgrade. Note that a factory reset will clear all NVR settings configured by the user.
Why Idis DR-6316PS-S Network Hardware PoE-enabled camera will not turn on?
If your PoE-enabled Idis Network Hardware camera won't turn on, first verify that the camera is actually PoE-enabled. Then, check the network cable; try replacing it and see if that resolves the issue.
General| Model | DR-6316PS-S |
|---|---|
| Type | Network Video Recorder |
| Channels | 16 |
| Power Supply | 100-240VAC, 50/60Hz |
| Video Output | 1 x HDMI, 1 x VGA |
| Audio Input | 1 x RCA |
| Audio Output | 1 x RCA |
| Hard Drive Bays | 4 |
| USB Interface | 2 x USB 2.0 |
| Video Compression | H.265, H.264 |
| Network Interface | 1 x 10/100/1000 Mbps Ethernet |
| Video Input | 16 x IP Camera |
| Operating Temperature | 0°C to 40°C |
To Next Page
