iDPRT SP420 - Basic Operation

SP420 User Manual
13
3.4 Operation Panel
3.4.1 Button Operation
Power On
When power off, turn on the power switch at the back of printer, then the indicator will
light on.
Power Off
When power on, turn off the power switch at the back of printer, then the indicator will
light off.
FEED button
Press the FEED button, and printer will feed paper to the specified position according to
the paper type. Just long-press the FEED button once that will feed the fixed distance
paper when using continuous paper. Long-press FEED button once that will feed a whole
label paper when using label printer.
3.4.2. Description of Indicator Status:
Be Ready
Status
Description
Color
Action
Color
Action
Green
Light
X
X
The printer is ready
Green
Flash Slowly
X
X
Pause
X
X
Red
Light
The position switch not in place
X
X
Red
Flash Fast
The label learning is abnormal
X
X
Red
Flash Slowly
Label positioning is abnormal
X
X
Yellow
Flash Slowly
Paper jam, label positioning is
abnormal