3.5.4 Printing Self-test Page
The self-test checks the printer’s current settings, status and whether the printer has any
problems or not.
1.Printing Manually
1) Make sure the roll is loaded properly.
2) Make sure the top cover and mechanism of the printer are closed properly. Then turn on
the printer.
3) When the printer is ready, press the feed button continuously. As soon as the indicator
flashes (blue) once, loosen the button. Then the printer starts to print the self-test page.
2.Printing by Windows Driver Program
1) Install the Windows Driver program.
2) Please set the “Interface” as the type you use.
3) Use the Windows Driver Program to print out the “Self-test page”.
4) Please refer to “Chapter 7 Windows Driver Instructions” for more detailed information.
To Next Page
Loading...
