To Next Page

To Previous Page

IDS 1632 User Manual 700-256-01I Issued March 2009

14.5.1.4 Group Arm Code

This code when entered will arm the partitions assigned to the user depending on their status. If all

partitions are disarmed, entering a group code will arm all of the assigned partitions. In a case where

some partitions are armed and others disarmed, entering this group code at the keypad of the disarmed

partition will arm the disarmed partitions only.

14.5.1.5 Group Disarm Code

This code when entered will disarm the partitions assigned to the user depending on their status. If all

partitions are armed, entering a group code will disarm all of the assigned partitions. In the case where

some partitions are disarmed and others armed, entering this group code at the keypad of the armed

partition will disarm the armed partitions only.

14.5.1.6 Arm Code

Codes having this property, when entered, will arm the partition – as long as this code is associated with

this the current partition.

14.5.1.7 Disarm Code

Codes having this property, when entered, will disarm the partition – as long as this code is associated

with this the current partition.

14.5.1.8 Report Open and Close

This option enables reporting of a pre-programmed reporting code when a partition assigned to this user

is armed/disarmed.

14.5.1.9 User Phone in Access

If enabled this allows the user to arm or disarm the panel using a DTMF telephone.

14.5.1.10 Report User Access

Codes with this property enabled will cause the Alarm Panel to send a User Access Report Code to the

Security Company every time these users enter their code.

Other manuals for IDS 1632

Questions and Answers:

Need help?

Do you have a question about the IDS 1632 and is the answer not in the manual?

General