IDTECH NEO2 - 0 X0001: Disconnect: no Response from Reader - RETURN_CODE_ERR_DISCONNECT; 0 X0002: Invalid Response: Invalid Response Data

To Next Page

To Previous Page

102 Class Documentation

Returns

RETURN_CODE:

• 0x0000: Success: no error - RETURN_CODE_DO_SUCCESS

• 0x0001: Disconnect: no response from reader - RETURN_CODE_ERR_DISCONNECT

• 0x0002: Invalid Response: invalid response data - RETURN_CODE_ERR_CMD_RESPONSE

• 0x0003: Timeout: time out for task or CMD - RETURN_CODE_ERR_TIMEDOUT

• 0x0004: Invalid Parameter: wrong parameter - RETURN_CODE_ERR_INVALID_PARAMETER

• 0x0005: MSR Busy: SDK is doing MSR or ICC task - RETURN_CODE_SDK_BUSY_MSR

• 0x0006: PINPad Busy: SDK is doing PINPad task - RETURN_CODE_SDK_BUSY_PINPAD

• 0x0007: Unknown: Unknown error - RETURN_CODE_ERR_OTHER

• 0x0100 through 0xFFFF refer to IDT_Device::getResponseCodeString:()

13.7.2.46 - (RETURN_CODE) emv_getTerminalMajorConﬁguration: (NSUInteger ∗∗) conﬁguration

Gets the terminal major conﬁguration in ICS .

Parameters

conﬁguration A conﬁguration value, range 1-5

• 1 = 1C

• 2 = 2C

• 3 = 3C

• 4 = 4C

• 5 = 5C

Returns

RETURN_CODE: Values can be parsed with errorCode.getErrorString()

13.7.2.47 - (RETURN_CODE) emv_removeApplicationData: (NSString ∗) AID

Remove Application Data by AID

This will REMOVE the an AID conﬁguration ﬁle and all the tlv data associated with that AID.

Parameters

AID Name of ApplicationID in ASCII, example "A0000000031020". Must be between 5 and 16 characters If

null or empty string is passed, it will remove ALL application data

Returns

RETURN_CODE:

• 0x0000: Success: no error - RETURN_CODE_DO_SUCCESS

• 0x0001: Disconnect: no response from reader - RETURN_CODE_ERR_DISCONNECT

• 0x0002: Invalid Response: invalid response data - RETURN_CODE_ERR_CMD_RESPONSE

#80152504-001 IDTech iOS SDK Guide for NEO2

IDTECH NEO2 - 0 X0001: Disconnect: no Response from Reader - RETURN_CODE_ERR_DISCONNECT; 0 X0002: Invalid Response: Invalid Response Data - RETURN_CODE_ERR_CMD_RESPONSE