104 Class Documentation
13.7.2.50 - (RETURN_CODE) emv_removeTerminalData
Remove Terminal Data
This will remove ALL configurable TLV data associated with the terminals Kernel configuration.
Returns
RETURN_CODE:
• 0x0000: Success: no error - RETURN_CODE_DO_SUCCESS
• 0x0001: Disconnect: no response from reader - RETURN_CODE_ERR_DISCONNECT
• 0x0002: Invalid Response: invalid response data - RETURN_CODE_ERR_CMD_RESPONSE
• 0x0003: Timeout: time out for task or CMD - RETURN_CODE_ERR_TIMEDOUT
• 0x0004: Invalid Parameter: wrong parameter - RETURN_CODE_ERR_INVALID_PARAMETER
• 0x0005: MSR Busy: SDK is doing MSR or ICC task - RETURN_CODE_SDK_BUSY_MSR
• 0x0006: PINPad Busy: SDK is doing PINPad task - RETURN_CODE_SDK_BUSY_PINPAD
• 0x0007: Unknown: Unknown error - RETURN_CODE_ERR_OTHER
• 0x0100 through 0xFFFF refer to IDT_UniPayII::device_getResponseCodeString:()
13.7.2.51 - (RETURN_CODE) emv_retrieveAIDList: (NSArray ∗∗) response
Retrieve AID list
Returns all the AID names on the terminal. Populates response parameter with an Array of NSString∗ with AID
names. Each AID name represent a unique configuration file to be loaded/used when a matching application is
found on a card during a transaction.
Parameters
response Returns a NSArray of NSString of AID Names
Returns
RETURN_CODE:
• 0x0000: Success: no error - RETURN_CODE_DO_SUCCESS
• 0x0001: Disconnect: no response from reader - RETURN_CODE_ERR_DISCONNECT
• 0x0002: Invalid Response: invalid response data - RETURN_CODE_ERR_CMD_RESPONSE
• 0x0003: Timeout: time out for task or CMD - RETURN_CODE_ERR_TIMEDOUT
• 0x0004: Invalid Parameter: wrong parameter - RETURN_CODE_ERR_INVALID_PARAMETER
• 0x0005: MSR Busy: SDK is doing MSR or ICC task - RETURN_CODE_SDK_BUSY_MSR
• 0x0006: PINPad Busy: SDK is doing PINPad task - RETURN_CODE_SDK_BUSY_PINPAD
• 0x0007: Unknown: Unknown error - RETURN_CODE_ERR_OTHER
• 0x0100 through 0xFFFF refer to BTPay::device_getResponseCodeString:()
13.7.2.52 - (RETURN_CODE) emv_retrieveApplicationData: (NSString ∗) AID response:(NSDictionary ∗∗) responseAID
Retrieve Application Data by AID
Retrieves the configuration information for a provided AID name, if that AID file exists on the terminal.
#80152504-001 IDTech iOS SDK Guide for NEO2
To Next Page
