IDW G-10-F33EB-HC User Manual

Innovative DisplayWorks
G-10f/GCG-10f
REPLACING THE DOOR LED LIGHTS
1 Unplug the cooler.
2 Remove
plastic
cover.
3 Disconnect top
light strand.
4 Disconnect
middle light
strand.
5 Unscrewlightstrand.
8
6 Remove entire light strand.
7 ToinstallLEDlightsfollowtheaboveinstructionsinreverseorder.
Notes:IfthereareanymalfunctionswiththemaincontrolpanelofLEDlights,
please contact a professional for replacement.
SETTING UP SPACER & POWER CORD HOLDERS
TheG-10f/GCG-10fissuppliedwithoneset(2pieces)ofSpacerstoholdthe
extralengthofPowerCord
1TakeoutthetwoSpacersandscrewssuppliedintheAccessoryPackshippedwith
the Cooler.
2UseaPhillipsscrewdrivertosecurethetwoSpacersontothe
rear of the cooler.

IDW G-10-F33EB-HC Specifications

General

Brand	IDW
Model	G-10-F33EB-HC
Category	Freezer
Language	English