EasyManuals Logo

IDW G-10-F33EB-HC User Manual

Default Icon
20 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #14 background imageLoading...
Page #14 background image
Instruction Manual
13
Add the first clause
REPLACING THE FUSE
Add the first clause
REPLACING THE FUSE
REPLACING THE FUSE
1 Unplug the cooler.
2 Removethescrewsfromthebackgrill,andthenremoveit.
3 Openthecoverofthefuseblock,asshownintheimagetotheleft.
4 Unscrewthefusebox,thenreplacethebadfuse.
5 Afterrepair,re-installallpartsreversingsteps1-5.
TROUBLESHOOTING
The following are not Malfunctions:
Issues Solutions
Liquid owing noise within cooler This liquid is the sound of the cooling agent owing through the pipes.
Refrigeration system is shutdown for
longer periods of time while temperature
inside is still very low.
This refrigerator has a strong level of heat preservation and can main-
tain a relatively ambient temperature.
Condensation on glass door This may be due to a high indoor humidity or a low inside temperature
value may be set. Wipe the door dry with a towel.
1 This refrigerator has been designed and manufactured according to National standards. If there are any questions
during use, refer to this operation manual to help troubleshoot problems.
2 When disposing of the cooler, please remove the door and lock assembly to avoid children accidentally becoming
trapped inside the cooler.
AFTER SALES SERVICE
Any product has the possibility of malfunction. Please observe the coolers operation and any changes to product being
stored. If there are any abnormal cases, refer to the table below. If there is still no change after following the below
instructions, please inform our service center in a timely manner to avoid a further loss of the unit.
Issues Solutions
Cooler is not functioning. Please check power supply:
Fuse damage
The plug is not securely inserted into the wall socket
Check for low voltage
Cooler is not keeping product cool. Provide ample space between all products to ensure proper
circulation of air.
Keep unit away from direct sunlight or other heating source.
Keep door closed as often as possible.
Be certain cooler is not touching external objects or walls.
Excessive noise Be certain the cooler is placed on a level surface.
Be certain cooler is not touching external objects or walls.

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the IDW G-10-F33EB-HC and is the answer not in the manual?

IDW G-10-F33EB-HC Specifications

General IconGeneral
BrandIDW
ModelG-10-F33EB-HC
CategoryFreezer
LanguageEnglish

Related product manuals